This course was designed by The Asbestos Institute for compliance with the federal OSHA standard for asbestos in construction, and covers removal of any ACM roofing material, asphaltic, “built-up” or cementitious.
This online course is in compliance with all the OSHA training requirements at 29 CFR 1926.1101(k)(9)(iv) except the “hands-on” portion of the training. This hands-on portion of the training is the responsibility of the employer (as is all OSHA required training), and should be conducted by the Competent Person for the site, in compliance with this OSHA standard, company procedures and following the control procedures in the Negative Exposure Assessment that the Competent person has developed.
Even though this Class II Worker Training is OSHA training, EPA NESHAP issues may apply, for instance, when the ACM waste generated may be (or become) Regulated Asbestos Containing Material (RACM). This would not affect the worker training, but would require an EPA certified Supervisor to be onsite and the waste steam would be regulated.
This online OSHA Class II Roofing Removal course is complete and convenient for the contractor removing ACM roofing, for a new hire or the entire crew. Since this OSHA required training is not always available at local training classrooms, the online format is especially convenient and cost effective. This course also meets OSHA’s requirement for annual training.
Any questions or discussion from course participants or employers is encouraged and welcome. Please contact The Asbestos Institute at 602-864-6564, or by email at [email protected]
